Logitech C270 Camera Mount for Prusa MK2/S and MK3, with wide angle lens support.

prusaprinters

<p>(Remixed from: <a href="https://www.thingiverse.com/thing:1864725">https://www.thingiverse.com/thing:1864725</a> <a href="https://www.thingiverse.com/thing:714475">https://www.thingiverse.com/thing:714475</a> <a href="https://www.thingiverse.com/thing:1406879">https://www.thingiverse.com/thing:1406879</a> )</p><p>&nbsp;</p><p>UPDATE 2:<br>Updated it with a MK3 version of the arm.<br>If it's a bit too snug, sanding the top of the "fork" is the easiest (that goes between the heatbed and Y-Carriage).<br>Naturally the fit will depend on your settings and material.</p><p>UPDATE:<br>I made a new frontplate to support a 12v 40mm LED ring, with a cover.<br>(C270_WideLens_FrontPlate_LED and C270_WideLens_LED_Cover)</p><p>I changed all the parts for the C270 camera mount, and made it support a cheap wide angle lens.<br>-It will require an extra M3 screw (plus a washer if the head is small) for attaching the camera to the arm, and an M4 screw to be able to adjust the vertical camera angle.</p><p>-The frontplate and backplate will require two ~m2.5x12 screws (Notune21 hasn't specified, so this is just a guesstimate). But I used two small m3 wood screws I had laying around, and they seem to have worked just fine.</p><p>-The arm has been modified to fit the MK2S buildplate, shortened and made in one piece (removing the need for the printed plastic screw). I also added two slots on the back for zip ties.</p><p>-The mount that screws directly into the camera has had the groove removed.</p><p>-The camera parts (back plate, front plate and focus ring) have been modified to support a wide angle lens.</p><p>-<strong>Naturally, you will have to print the arm out of a material that can tolerate high temperatures. Since it contacts the underside of the heatbed</strong>. (I used PETG just fine for a few years, but it can vary a lot depending on brand just how tolerant it actually is. So I would recommend something more temperature resistant)</p><p>-The LED ring is 40mm OD, and ~27,75 ID</p><p>I used a cheap magnetic lens kit made for cellphones.</p>