Logitech G25/ G27/ G29 Handbrake

thingiverse

Items needed: -15 mm aluminum tube - Microswitch 28mm -Two bolts (3x30 mm) with 2 nuts. -One bolt (8x50 mm) with 1 nut. -One spring - [Optional] One Digispark Usb ATTINY85 board (to emulate a key for our handbrake). I bought this one: http://digistump.com/products/1 (from aliexpress). -Two wires. Tools needed: -Soldering Iron -Hacksaw Dremel alike tool. -Driller (to make an 8 mm hole to our tube). Software needed (if you going to use Digispark Usb ATTINY85 board) -Arduino IDE (https://www.arduino.cc/en/main/software). You'll have to install the trinket keyboard library's and the Attiny85 board drivers (because Arduino IDE have to recognise the board). -Digistump digispark drivers (https://digistump.com/wiki/digispark/tutorials/connecting). -Handbrake board code (this code enables the board to push the COMMA keyboard button mapped to our switch). Handbrake code download: https://drive.google.com/file/d/1ueVhz8GHW2HozKdMkt_V-fGilqvFoX9U/view?usp=sharing You can also do do it like in this video guide: https://www.youtube.com/watch?v=scQ8-uSq01E Or you can use old usb joystick. I recommand to use method from the video, because works with all games, just pay attention when soldering and don't overheat anything, and be super careful not to bridge the resistor. Remixed from: https://www.thingiverse.com/thing:2772250