loo seat fixings

prusaprinters

<p>If you have ever had to replace a loo seat you will know its probably the least pleasant job in the house because you have to scrabble about under the rim of the loo to undo the bolts.</p><p>This design enables you to fix a new loo seat entirely from above.</p><p>Everything is in the kit except the two M5 bolts: use stainless steel ones!</p><p>This design consists of a long plastic nut that rides up a channel to expand a housing that jams against the side of the ceramic pan. (A bit like a rawlplug.) The plastic nut is part of the holder print. As the screw is tightened the nut breaks away from its support and rides up the channel.&nbsp;</p><p>So 1) no access is required to below the ceramic pan and 2) you can screw and unscrew the loo seat holder from the top.</p><p>For the best results re-slice the .stls and print using a 0.4mm nozzle.</p>