LOVE shaped usb flash drive case

thingiverse

2 in 1 Keychain and USB flash drive. LOVE shaped to remember the important things in Life. Such personalised usb cases and key rings can be customized at http://customflashdrive.co.uk/3d-print-your-own Print Settings Printer Brand: Leapfrog Printer: Creatr Supports: No Resolution: 0.2 mm Infill: 15% Notes: We use 2 types of 3D printers. The first one is a Witbox and the second one is a Leapfrog Creatr. Here we are going to explain our printing settings based on our experiences with these 2 machines. In the first place we must tell you that we use PLA as printing materials. For this reason these settings are specifically for PLA. Wall Thickness: 0.8 mm – The Extrusion Width of both printers’ nozzle is 0.4 mm. Therefore 1 shell is not enough to provide sufficiant strenght, however 2 shells and a total wall thickness of 0.8 mm gives a good print result. This will be a strong and durable USB case in fact. Infill: 15% – Minimum 15% infill is recommended for stability. Otherwise the outcome might easily brake. Please use this setting for satisfactory result. Obviously you can higher the percentage of infill, but do not lower them for the sake of strength and durability. This is a honeycomb-shaped infill. In case you use this setting of 15% infill one print will take about 30 mins, no more. Printing Speed: 150 mm/sec – Printing Speed has an influence on quality. This speed might seem to be too fast, but it was tested before, like every other parameter. Post-Printing with keyring and usb memory stick installed Insert a Suitable USB Memory Stick You can buy a USB memory stick at Amazon here: https://www.amazon.com/V7-Mini-Flash-Drive-VU24GCR-YLW-2N/dp/B00AZG83CQ/?th=1 This type fits the USB hole perfectly. Choose a suitable colour which goes well with the colour of the printing material. Available capacity: 4 - 8 or 16 GB. After you have the USB and the case is printed stick the memory stick into the hole. Simply use a glue gun! Custom Section Looks nice in a gift box