Lowrance Active target Ice fishing transducer mount

cults3d

Build your own rotating transducer mount! There is 2 versions of lower fork. Simple for down and forward view that fits through 6" hole and new completely redesigned that allows usage of scout mode also and fits in 8" hole (see instructions at bottom). For simple attachment that you can fit transducer under ice through 6" hole: You need: - 20x2mm aluminium pipe - 25x2mm aluminium pipe - 2x 40x5mm socket cap screw (Stainless) - 2x 5mm nut - 2x washers Print top handle, bottom fork and 2x ducermount_lower_upper. Cut 25mm pipe to length what you like and insert lower_upper parts to pipe ends. Put handle to 22mm pipe and mark hole position and drill hole to pipe. Attach handle to pipe using screw. slide 25mm pipe over 20mm pipe and check proper position to cut it. cut 20mm pipe and slide it inside 25mm pipe. insert transducer fork into 20mm pipe so that fitting is tight. drill hole to proper position and attach fork using screw. Use mounting clamps to build attachment point for rotation handle. ps. If you want to use original clamp with design, print ducermount_lower21 as lower part. - 25mm lower fork also available. New 3 position mount: You need: Printed parts: 1x down_upper21mm.stl, down_fork.stl and down_center.stl. 10mm x 1mm x 50mm spring 2 x 5x30mm bolt, M5 nyloc, 2 x 5mmx15mm washers (those bigger ones) There is also files for tripod that prevents thing to fall into abyss. Print 3 legs and centerpart, you need m5 nylocs and some bolts to attach legs in certerpiece.