LPC Adapter case (RepRap Firmware on SKR boards)

thingiverse

This is a case for the LPC Adapter board that allows to run RepRap Firmware on controller boards with LPC1768/1769 CPUs (e.g. Bigtreetech SKR 1.3/1.4). You can buy the adapter board on Tindie: https://www.tindie.com/products/pcr/reprapfirmware-wifi-adapterboard-for-skr1314/ LPC port of RRF: https://github.com/gloomyandy/RepRapFirmware The case itself top/bottom are snap fit. I designed it to be mounted to my SK-Go printer, that has pre-drilled mounting holes on the back plate for a Raspberry Pi. Only two of the holes that are 49 mm apart are required (middle-to-middle). For the SK-Go there is an alternative mounting spot. Next to the SSR are two M4 size holes that are 48 mm apart and work as well. Should you have a Raspberry Pi in place already. Parts required to mount the case (mounting hole distance 49 mm) : 2 x M3 nuts 2 x M3 bolts 8-12 mm (I used 8 mm for the SK-Go back plate) **Update 1 - 2020-09-05** Added v4: This version corresponds to the adapter version v4 with the MOT EXP port