LulzBot Taz 4-5 E3D Direct Drive BondTech Extruder Mount
thingiverse
This mount will let you mount the BondTech extruder with a E3D (or clone) Hot end on your Taz 4-5 so that its and direct drive set-up. All you have to print are the two pieces. Heat up the nut inserts from your old fan mount holder and pull them out, and reheat them and press them into the new printer mount i used two 10-24 1.5" screws and nuts too mount the extruder should be able to use m6 also with an Allen head Wiring. you need 12v for the fan on the hot end. rewire the wires for the thermostat rewire the wires for the stepper motor firmware. need to set reset/ calibrate the estep. (Mine was 492.45) after you get it all set up you have to reset you z home offset
With this file you will be able to print LulzBot Taz 4-5 E3D Direct Drive BondTech Extruder Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on LulzBot Taz 4-5 E3D Direct Drive BondTech Extruder Mount .