Lulzbot Taz 4/5 Raspberry Pi Cover
thingiverse
This is my take on an integrated cover for the Lulzbot Taz 4/5 which accepts an 80mm fan that is up to 25mm deep as well as a Raspberry Pi to run OctoPi (highly recommended). The Raspberry Pi has a 40mm attachment to mount above it that will run while power is applied to the Pi - mine is connected with a touch of hot glue in case I need to separate for any reason down the road. If you chose to incorporate this design, you will need four M3 35-40mm bolts (partially threaded is fine) to replace the shorter stock bolts. The spacing to plug power into the Raspberry Pi through USB is a bit tight - I'd recommend either purchasing an angled connector or rewiring an old connector like I did.
With this file you will be able to print Lulzbot Taz 4/5 Raspberry Pi Cover with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Lulzbot Taz 4/5 Raspberry Pi Cover.