M8 to PC4-M6 Adaptor V8

prusaprinters

<p>This is a small adaptor which allows you to attach a PC4-M6 Festo type connector to the M8 brass fitting on the stock Prusa Mini extruder. I can also be used for the same purpose if you have the upgraded Bondtech Prusa Mini extruder installed.</p><p><strong>Recommended Print Settings:</strong></p><ul><li>Material: PLA, but anything should work fine</li><li>Nozzle: 0.4mm</li><li>Layer Height: 0.15mm</li><li>Supports: Needs to be printed supports internal to the M8 hole</li><li>Orientation: The STL should be oriented correctly with the larger M8 threaded hole side on the build plate.&nbsp;</li></ul><p>Alternatively I've provided a pre-sliced gcode file for PLA which contains 4 adaptors</p><p>&nbsp;</p><p><strong>Change Log:</strong></p><p><strong>V8</strong></p><ul><li>Increased filament hole diameter to give a bit more clearance</li><li>Added the knurled ring to aid in tightening and to increase strength. The V6 version had an issue where it would break after a while, due to there being very little surface area at the interface between the two threaded holes.</li></ul><p><strong>V5</strong></p><ul><li>Original version</li></ul>