macbook pro 13" late 2013 stand

prusaprinters

<p>This is a stand to hold a macbook pro 13" late 2013 (thickness 18mm) in upright position.</p> <p>To protect the macbook's surface from scratches I glued 6 felt protectors into the appropriate positions. The protectors I used were about 10mm in diameter and 3mm in height.</p> <p>The original CAD was created in onshape. With your own account you can import and modify, without account you can export numerous different CAD formats (sorry no OpenSCAD for this quick design).</p> <h3>Print instructions</h3><p>The first print without support failed due to bad bed adhesion. I reprinted with supports but found that my first layer calibration was off. The maximum overhang is 60°, so it should be possible to print without supports (may need brims though).</p> <p>Recommendation:</p> <ul> <li>3 perimeters</li> <li>25% gyroid infill</li> <li>print with variable layer height (.2mm base layer height)</li> <li>use supports</li> </ul>