Machine Vise with M5 Mount Nuts

thingiverse

###This is a remix of [Yet ANOTHER Machine Vise by TheGoofy](https://www.thingiverse.com/thing:2064269), to be used as base for [LiftPod](https://www.thingiverse.com/thing:4614448). ###Modifications: - 3 slots for M5 nuts on one end. Allows to screw in 3 M5 bolts. - Printed thread changed to 45 degree overhang, easier to print, and longer pitch. - 6.35 Hex hole at the end of knob to drive easily. - Tolerance generally increased from 0.15mm to 0.25mm. - Added a 0.6mm flexible sleeve to increase friction. ###It takes M5x25(or 20) bolt for LiftPod. Same as the clamp bolt. ###Print the sleeves with flexible material. ###No supports required. 0.2mm layer height. 3 wall lines. 35% infill. Increase top/bottom thickness to bases if you require more strength. ###The M5 knob might appears to be ultra large in some slicers because the unit is falsely recognised as cm. If that's the case, just scale down to 10% in slicer. ###Visit the page of original design for assembly instruction video.