Magnetic Mount Super Charged Printer Head

thingiverse

Blown V8 inspired printing head! Quick detach front with magnets and blower with movable throttle plates! This is designed for the Ender 3V2 but may be compatible with other printers as well. https://youtu.be/QZxzuuN2Lyk You can use 10x5 magnets on the mounting plate and 10x3 magnets on the printing head or you can use a 10x5 magnets on the mounting plate and M3x5 screws on the printing head. Results may vary based on the strength of the magnets. 10x5 magnets: https://www.amazon.com/Round-Multi-Use-Magnets-Refrigerator-Project/dp/B07G9371T9/ 10x3 magnets: https://www.amazon.com/DIYMAG-Refrigerator-Magnets-Premium-Brushed/dp/B08GLS59JS/ M3x5: screw https://www.amazon.com/uxcell-M3x5mm-Button-Socket-100pcs/dp/B01C3LHQ0K/ This printing head is just fresh through development, so there might still some bugs on it. If you find them let me know and I will work to make updates! Offsets: X: -30 Y: -34 Z: -2.3 (your results may vary) 5/30/22 Updated the front and rear part models to remove some interference with the gantry bolt, BLTouch, and the front fan. Added a second model for rear plate (tight) which has a 0 designed gap and makes for a tighter fit to keep the BLTouch more consistent. 5/31/22 Added models for Orbiter V1.5, Orbiter V2.0, Stock hotend, and Dragonfly BMS. Make sure to download the correct file for your setup! If your dragonfly BMS hot end has 6 cooling fins -> Download the dragonfly BMS version If your dragonfly BMS hot end has 7 cooling fins -> Download the stock hot end version 6/3/22 Updated the front cover to move the BLTouch 3mm further from the bed. 10/15/22 Added model "front_mount_Largest_Openings" Updated the front cover to have much larger fan duct openings (100% larger) Added a slot to route BLtouch wires through Added model "stop_switch_15mm_long" 15mm long stop switch extender to keep the large printing head from crashing into the QR cover on the Ender 3