Male Masturbator inspired Stroker mold for silicone and Casing

cults3d

Great time to have during the days of quarantine, You can't give COVID-19 to a silicone toy! ;) This model is an exploration into designing and making of my own sextoys. That's why I let myself be inspired by one of the most successful in the business - male masturbator. The models for the casing and the sleeve might be interchangeable with the real deal, but I have not been able to test. When you're done printing the mold you can plug up the seams using cheap modeling clay. I coated the inside of the mold with Vaseline as a release agent but it's probably not strictly necessary. After that silicone can be poured through the opening in the top. The cap is to keep the middle inside from not tipping to either side. I used this silicone:https://www.siliconesandmore.com/nl/siliconesandmore-siliconen-additie-kleurloos-5-zee.html It has a shore hardness of ~5. I would suggest to find the lowest hardness you can find yourself. You'll need somewhere between 400 and 450 ml for the pour. The top-cap of the stroker is also for controlling the amount of air that can pass through the end for creating a sucking effect or not. The StrokerMold_Inside resulted in a toy that was too tight for me with the specific silicone I used. I recommend printing the StrokerMold_Inside2 instead. This one feels so much better! Both gave me strong orgasms but the second one just slips right in! :p As another bonus, you'll also only need about 350 ml of silicone!