Malyan M150 DiiiCooler mount

thingiverse

This is a remix of leetbulb's DiiiCooler adaptor for the Malyan M150 printer, I've repositioned the cooler mount holes 4mm to the right as suggested in the comments of leetbulb's adaptor. I remixed the adapter-v6_fixed version of leetbulb's part. I found that the original part didn't mount the cooler well on my printer, the cooler was touching the heater block when I mounted everything up. I reworked the original STL in tinkercad to extend the cooler mount plate by 4mm and shift the holes over. Its tricky to get under the head and check that this is now centred, but from a fingertip feel I believe this is now clear of all 4 corners of the block. When mounting the cooler to the printer with this bracket I found that the cooler needed to be modified because it hits the bracket. If you've printed the DiiiCooler then you'll know that there is an area for a 4mm nut to be fitted that blower fan 4mm fixing bolt. I found that the walls around the 4mm nut holder hit the mount brackets and so had to be chopped down otherwise the cooler didn't fit well and was angled down to hit the build plate. I used a hacksaw to modify my cooler rather than rework and reprint it again! Just as for the original adaptor you need 2x 6mm M3 bolts to fit the bracket to the printer, and 2x 12mm M3 bolts & nuts to fit the cooler to the bracket. The cooler plate has the holes 40mm apart so you will need to use it with one of the 40mm versions of the DiiiCooler. Print Settings Printer: Malyan M150 Rafts: No Supports: No Resolution: 0.2 Infill: 50% How I Designed This Remixed the original adapter-v6_fixed.stl using Tinkercad.com