Manual reel with brake

thingiverse

Just a simple small wall-mounted reel. You need to print: 2x Disc 1x Handle 1x Halter Left and Halter Right or Halter Both Sides 1x Spindle 1x Toothed Cap left-handed or right-handed, left-handed if you want the Crank on the left-hand side. 1x Blocker Disc, Handle, and Toothed Cap must be glued to the Spindle. I secured the Blocker with a wire from a paper clip. Raft is only needed for the Spindle. For the crank, I used an M6 screw. Printing Time takes around 6 hours.