Marble Maze

Marble maze based of the Brio wooden marble mazes. Designed to allow for customizable boards (192.8mm x 152.8mm). The current board is a 6/10 in difficulty. At some point I want to make easier and harder puzzles.Files To Print (3MF or STL)3MFFrame-Board-1Frames-Small Parts-2Board Wall - 3STLBoardBoard WallsFrame Link Cover (x2)Frame Pin Cover (x4)FrameFrame Pin (x4)Game HolderInner FrameKnob (x2)Link(x2)Player Pin Cover (x2, One mirrored in Y)Player Pin (x2)DirectionsTake the Game Holder and Inner Frame and align the holes and insert a Frame Pin into both sides. Cover the Frame Pin with Frame Pin Cover. The Game Holder should spin freely when finished.Take assembly from step 1 and insert into Frame. Add the remaining two Frame Pin into the holes and cover with the Frame Pin Cover.Insert the two Links into the Game Holder piece of the assembly. Cover the Link with the Frame Link Cover.Slide in the Player Pin on the two sides with the longer arm towards the LinksLine up the Links and the two Player Pin Covers and then push into placeHold the Player Pin in place while pushing the Knob into positionTake the Board and Board Walls and snap into placeSnap the Board into the Game Holder