Martian II RunCam Eagle 2 + Pro Mount

thingiverse

Martian II Side Plates for the RunCam Eagle 2 and Eagle 2 Pro. Camera has 0-45deg. Assembly requires qty 6 2mm x 4mm screws, the camera should come with 4 screws that will work directly. I found some 2mm x 6mm screws from previous RunCam Cameras so I included a washer to use with the longer screws. I also designed in a spot for a 9mm OD buzzer. If the buzzer is not desired, print the non buzzer version twice, make sure that the part is mirrored in the slicing software to ensure there is a left and right version. same thing goes for if you would like the buzzer on the other side, simply use the mirror feature in the slicing software. I have only tested with the default camera lens at 22.5deg mounting, the tips of the props are just visible but the standoffs are not. I have had a few crashes and so far the camera seems well protected still. I will be testing the RC25G lens in the future and will update the design if the camera position needs to be moved. Buzzer I designed the part for is here, Any 9x5.5mm buzzer should work. https://www.amazon.com/BETAFPV-Terminals-Electronic-Continuous-12X9-5mm/dp/B073RH8TQK/ref=sr_1_7?ie=UTF8&qid=1503421661&sr=8-7&keywords=drone+buzzer Design Files are included for easier modification