Master Chief Helmet Halo Infinite fanmade 3D printable model 3D print model

cgtrader

Ready to print Master Chief Helmet 3D model (digital file). The model is scaled for an average man head of 58 cm girth (the size can be changed if need). Final helmet consists of 2 main parts assembling together (base part and back part) by 2 pairs of neodimium magnets (I recommend using cylindrical magnets of 8-10 mm diameter and 5-8 mm length). Back part has special conic recesses for drilling holes for magnets. The helmet has many small high-detalized parts, which are sepatated from the main part and placed into individual files, so you can print the main piece by FDM printer and use photopolymer printing for small details (or just use better printing resolution for them). Back detachable part has 3 pieces, two of them (chip holder and holder plate) can be made of transparent resin and then painted in some places, so you can make spectacular blue lighting for this part. AI chip can be placed at any time into special slot of back part, it will stay there because of magnet attraction. There're special recesses for the magnets in the chip and in the holder. Average wall thickness of each big part is about 4-5 mm, so you can use polymer casting for making copies. Before 3D printing you can check the helmet size by making low poly version of it out of paper using Pepakura (the file name is MCH_Low-Poly). If the paper helmet fits to you head you may print the file, if not, try to change its size at a certain percentage and when you find proper value just use the same percentage for 3D printing. This approach will help you to save a lot of filament and time. Files format: OBJ Contact me if you have any questions.