Matek CRSF-PWM-C Receiver Case

thingiverse

I wanted an ExpressLRS receiver with more than 5 PWM servo channels, in a conventional receiver format for my larger fixed wing planes, so I built one using Matek's CRSF-PWM-C and ELRS-R24-D boards. To make the receiver to fit in this case you will need the following parts: - Mateksys CRSF-PWM-C - http://www.mateksys.com/?portfolio=crsf-pwm#tab-id-3 - Mateksys ELRS-R24-D - http://www.mateksys.com/?portfolio=elrs-r24#tab-id-1 - 10 x 3 row right angle .1" header pins - for the PWM outputs - 4 x single row 0.1" header pins - For UART2 To minimise the height of the completed stack I mounted the ELRS RX to the bottom of the CRSF-PWM-C board with 1mm gel mounting tape, before soldering the pins in place, to join the boards. Note: If you use header pins with the plastic spacers between the 2 boards the stack will be too tall to fit in the case. The case is designed to be held closed with the included label, which also gives you a reference for the pins, or you can just use tape. But the label looks cool.