Mavic Pro Clone Prop Adapter for 2212 Motors
thingiverse
This is a prop adapter for Mavic pro. It's design to snug fit to the 2212 920kv motors with 6mm thread. If it's too tight, enlarge the X,Y by 5% in the slicer. In order to use the adapter, you need to disassemble the blades from the Mavic pro props and use the adapter to lock the blades with two screws. I tested this adapter on the bench with full power (3s lipo) for 10 minutes, not yet in-flight. Use on your own risk... PLA is not suitable for it, please use ABS or better, nylon or PC. Please balance the fully assembled prop and adapter. failing to do so may results with broken adapter and/or failed motor bearings.
With this file you will be able to print Mavic Pro Clone Prop Adapter for 2212 Motors with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Mavic Pro Clone Prop Adapter for 2212 Motors.