MEAN WELL LRS-350-12 DC 60mm Fan Mod

thingiverse

I created this for a replacement fan for the MEAN WELL LRS-350-12 DC. The fan is the exact size as the stock one. Note: The power supply has a 60mm area specific to the fan, other components of the power supply limit the size of the fan. So, I used the Noctua NF-A6x25 FLX, Premium Quiet Fan, 3-Pin (60mm, Brown). which is 10mm thicker than the stock fan. I made this to house the thicker fan, without replacing the entire cover of the power supply. I made it so the fan bracket would sit on top of the current power supply cover (you will have to cut a 60mm hole) in the top to allow this fan to sit down inside the power supply. Fan: [Noctua NF-A6x25 FLX, Premium Quiet Fan, 3-Pin (60mm, Brown)](https://www.amazon.com/gp/product/B009NQMESS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) Power Supply: [MEAN WELL LRS-350-12 DC](https://www.amazon.com/dp/B07VTLJS18/?coliid=I3ELMR2KTFGOGY&colid=6ZKELF1YLR9U&psc=1&ref_=lv_ov_lig_dp_it) Using AnyCubic Mega X with the following Mods: 1. TMC2208 Stepper Motor Driver: [DORHEA TMC2208 V1.2 Stepper Driver Module with Heat Sink](https://www.amazon.com/gp/product/B082LSQWZF/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1) 2. Redrex Upgraded Aluminum Bowden Extruder: [Redrex Upgraded Aluminum Bowden Extruder with 40 Teeth MK8 Drive Gear for Creality CR-10 Series Ender 3 and Other Reprap Prusa 3D Printers [Right Hand]](https://www.amazon.com/gp/product/B07DDGGN92/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1) 3. Marlin 1.1.9 by davidramiro (for Mega X): [Anycubic i3 Mega / Mega-S Marlin 1.1.9 Custom Firmware - Extra Features & Quality Tweaks](https://www.thingiverse.com/thing:3249319) 4. Bowden Hot End Fan MOD/Upgrade: [Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)](https://www.amazon.com/gp/product/B009NQLT0M/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1)