Meanwell LRS-350-24 Mount

thingiverse

Version update 1.5: * Made the bottom half 10mm shorter as it provide no additional benefit * Fixed power supply mounting hole placement for the bottom piece. * added gcode file with proper orientation and support structures. The file is for PLA filaments only. Original: Meanwell LRS-350-24 is perhaps the best 3D printer power supply out there. It is extremely reliable and relatively compact. FLSUN i3 printer comes with a 12V power supply which is kinda limiting plus it was mounted one a very flimsy bracket such that printer bed movements during printing cause power supply to vibrate. These vibrations show up in a print. After searching through Thingiverse for a power supply mount on a 2020 frame, I found them all lacking in one way or another so I decided to create a power supply mount inspired by the great work of other Thingiverse members. Here're the goals I put in front of me before the start of the design: * Mount should be rigid. Can be mounted on ANY printer that uses 2020 extrusions and H frame(FLSUN,Creality,Geetech,Alphawise, etc) * No "frankenbolts": Do not leave the bolts sticking out. Try to make them "flush" with the surface * have a power switch and a standard plug * Provide easy access to voltage regulator for minute adjustments to the outpu * Cables should come out below the mount inside the 2020 rails to hide wires * Outside of the mount should be flush with 2020 frame to allow use of reinforcement brackets such as this one: https://www.amazon.com/gp/product/B01H4YPT64 * Power supply should be bolted into the mount using existing LRS M6 mounting holes * The mount should not cover/restrict cooling vents or fans. Power plug&Switch: https://www.amazon.com/URBEST-Module-Switch-Socket-IEC320/dp/B00ME5YAPK Mean well LRS-350-24 power supply: https://www.amazon.com/gp/product/B013ETVO12