Meanwell LRS-350-24 PSU Case for Prusa Mk3

thingiverse

After seeing some of the designs on Thingiverse copied from the original PSU case I printed a couple and they didn't have the features I wanted so I made my own from scratch. I used the official 3D model for the LRS-350-24v Meanwell PSU for reference for all of the holes. What I needed was: * Easy access to the terminal strip screws and power adjustment. * Enough space for the horribly designed Power Panic PCB wiring. * A visible 3 segment voltmeter. * Vent holes for the air flow. * A centrally located wire access hole. I am in the process of verifying the model currently. I'll be posting the final version in a few days. Keep in mind it's a work in progress. * I didn't do the hole in the bottom because I am using extended cables so if the cables are long enough you should be able to route them through the hole and screw them down before the PSU is in place fully. I also added de-soldered the power panic power wires and put in a JST connector so that it can be unplugged. I would use supports or turn the model on it's side and print it so that the vent holes don't need supports. 2/3/2019 - Created a version without the DMM and added bottom access.