Mei's little robot Snowball

thingiverse

Update: I have a static version of this that is cheaper to make and doesn't require any special moving parts. https://www.thingiverse.com/thing:2623144 I recommend this one. Printed on a Prusa i3 and a Ultimaker 2 Extended in PLA and PETG. This is Mei's robot from Overwatch, Snowball. Mei throws him when she casts her ultimate ability, Blizzard. I put a lazy susan part in mine so his bottom and top can rotate but made a non-rotatin connector here. If I can find the lazy susan part again I will link and upload the connector for that one. Screw the head to the connector_B.stl then fit magnets to it and bottom.stl Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: Yes Resolution: .15 Infill: 25% Notes: Quantities 2x Flap 2x Flap (mirrored) 3x thrust 2v One of everything else. Post-Printing For the flaps I made a single file, mirrored it and printed each version twice. I connected them with 3mm screws and super glue. On all the magnets I put a margin of 0.1mm to account for my printer's quirks so you may need to glue the magnets in place. Magnets, Cylinderical: quantity x diam x height 8 x 8mm x 4mm 6 x 5mm x 3mm The 8mm mangets might have been overkill for the top of his head, consider using 8mm x 2mm instead. To connect the head to the bottom I used #10 screws and nuts, a 5mm screw would also do. Every part was sanded up to 3000 grit and holes were filled with filler material. Now it is in the process of being painted and having electronics fitted. Will upload code and configuration once he is done. To do Fit a raspberry pi, screen and other electronics. Working on some light defusers for the thrusters and will update when I have some designs. Get some servos on the flaps. Update with complete non-printed parts list.