MFG Crosswind Slap damper mod

thingiverse

Various files that should allow you to recreate the same modification that I did. Should be fairly self explanatory from the pics, if you have issues just hit me up. Personally I printed all parts in XT-CF20 and the bearings you need are two 8x22x7mm. Slap damper was from aliexpress https://www.aliexpress.com/item/MT09-FZ09-CNC-Steering-Damper-Stabilizer-Linear-Reversed-Safety-Control-For-Yamaha-MT-09-FZ-09/32673579412.html?spm=2114.01010208.8.3.onAydT Use a m8 washer between the main 3d printed mount and the bottom bearing. Forward end of slap damper mounts in one of the existing holes on the rudder base - just drill it out and tap for the screw. I also added a 1mm Nylon washer just to protect the base from the small bit of rotation that the part experiences there. If you don't use that then you'll need to make that part 1mm taller or print a spacer. I would recommend tapping both holes on the main 3D printed part too.