MGN12 Carriage for Anycubic Predator with Smart Effector
thingiverse
MGN12 adapter for the Anycubic Predator, rails are mounted directly on the extrusion without any adapters. I have been printing with these carriage for a few weeks already at 150mm/s outside wall; 200mm/s inside wall and infill with no issues. Requires: - 6x 12mm M3 - 12x 16mm M3 - 3x 6mm M4 - They are used to attach the springs for the flying extruder, stock screws can be reused - 12x Zip Ties for the belts (recommended) Th zip tie attach must be facing the linear rails, if the the opposite direction it will collide with the top of preventing the endstop to be triggered. Must be printer with filament having good layer adhesion and stiffness, I used ABS+. I recommend at least 3 walls and 20% infill to ensure proper rigidity.
With this file you will be able to print MGN12 Carriage for Anycubic Predator with Smart Effector with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on MGN12 Carriage for Anycubic Predator with Smart Effector.