Mini Key Chain Bottle Opener PLA
prusaprinters
<p>Mini Key chain or backup bottle opener that works well with PLA and prints fast. No coin or additional material needed.</p><p>It is designed so that the teeth of the bottle cap don't bite into the opener material. So you won't have nasty PLA bits falling in your bottle.</p><p>It lifts the cap gently without deforming it too much.</p><p>I suggest to print with 100% infill, but I guess it works without any infill and 4-5 perimeters as well. To be tested yet.</p><p>Layer heights 0.1 to 0.3 work fine. At 0.2 the print takes around 18 minutes at 0.3 around 15 minutes, depending on your printer.</p><p>Enjoy your beverage of choice.</p><p>Cheers</p>
With this file you will be able to print Mini Key Chain Bottle Opener PLA with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Mini Key Chain Bottle Opener PLA.