Mini Kossel Adjustable Endstop

thingiverse

This is an endstop mount for MBI-style endstops on a Mini Kossel. This will fit either the 1515 or 2020 extrusion (both .stl files included). It is adjustable by the fact that the bolt for mounting to the extrusion is relocated to make it easy to get to. Just loosen, position, and tighten to adjust then forget about it. Well, unless you move, transport, or otherwise upgrade your printer in some minor way. In which case, you should always calibrate your printer to ensure optimal printing quality. See my book, "3D Printing with Delta Printers" (Apress) for more information about calibrating, adjusting, and maintaining your delta printer. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX BYOE Rafts: Doesn't Matter Supports: No Resolution: 0.30 is fine Infill: at least 20% Post-Printing Notes Depending on the endstop board you use, you may need to use washers to offset the board from the mount due to the soldered pins protruding beyond the board. Just 2 or 3 washers on each side should be enough. Or, you can trim them like I did and use only one thin plastic washer. How I Designed This Openscad! Source file included.