Mini Kossel Smoothieboard Mount

thingiverse

Actually, this Smoothieboard mount will work on almost any 3D printer but I designed it to attach to the Z column on a Mini Kossel. the mount is open to allow air circulation/cooling. NEW V2 UPDATE The new V2 model has cable holders for the steppers, thermistors and endstop wiring. It also moves the mounting holes to ears - I was getting tired off having to remove the Smoothieboard in order to make adjustments to the mount location! Use the same instructions as the original. Instructions Print with 3 perimeters and 25% infill is fine. Perimeters are needed to give enough plastic to thread holes to mount the board. I used four 4-40 x 1/2" screws. I tapped the standoffs 4-40 - but tap from the backside so the little standoffs don't break off. Mount to 15mm channel with 3mm x 10mm screws and nuts