Mini RAMBo Case

thingiverse

Case for a Mini RAMBO. Designed to fit on the back side of the Z Rails on a Ord Bot Hadron 3d Printer. All parts will print flat. http://reprap.org/wiki/MiniRambo 04/15/2017 - New Bottom - Updated to provide more space for the mounting screws. Also increased the clearance for screw heads. Added a latch piece that can be glued onto the cover to allow a 4mm screw, inserted from the bottom, to hold the cover closed. I cut sections of 1.75 filament to use as dowel plugs. Print Settings Printer: Ord Bot Hadron Rafts: No Supports: No Resolution: .2 Infill: 30% Post-Printing For PLA, use super glue for final assembly. Reset Button: For the reset button use a piece of 1.75 filament. Heat and press the end of the filament with a lighter to enlarge the inside portion. Install the filament reset button before the RAMBo board. Hinge: I used a section of 1.75 filament for a hinge but you could also drill out the holes and use screws. I plan to glue a magnet in as a latch catch for the cover.