Mini spider quadcopter PD2015

thingiverse

-------> 2015/03/28 upgraded version http://www.thingiverse.com/thing:744013 -------> 2015/02/20 updated central and top plates This spider mini quadcopter design allows you to mount the gopro and the fpv camera together in the central plate. Also, a mobius camera could be mounted using the slots on the central plate (instead of gopro). Recommended setup (DIY as you like): Notice that the estimated overall weight is 670g (with GoPro) and the wingspan is 290mm. 3s setup, 12A ESC: 1806-2300kv motors, 6x20 (slow and efficient flight) - 5x45 (fast flight) propellers, 3s 2200mah 25c battery. 1806-2000kv motors, 6x45 propellers, 3s 2200mah 25c battery. 4s setup, 12A (or 18A) ESC (ultra fast flight): 2207-2100kv or 2208-2000kv motors, 5x45 propellers, 4s 1600 35c battery. Enjoy! Instructions Print the plates in PLA using 35-40% infill and 2-3 shells. Is recommended to print the arms with 70% infill (in PLA) or 25% infill (in ABS). Bill of materials: 8x M3 16mm screws. 14x M3 8mm screws. 2x M3 nylon (or standard) nuts for fpv camera mount. 8x 35mm spacers (or 30mm if your FC pin configuration allows it). Many 3mm zip ties. For better grip, we recommend mounting the gopro over gel/foam/sorbothane pads.