Mini Wheels - BBS E30

prusaprinters

<p>I recreated some classic (JDM-)wheels.&nbsp;</p><p>They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm.&nbsp;</p><p>They're not a perfect copy as I drew them just after some pictures from the internet.&nbsp;</p><p>Print them as you like, but I suggest to use "Archimedean chords" as the infill for the top layer, especially on wheels with silver faces.&nbsp;</p><p>The inner and outer lip should be printed with the flange down and print quite good without supports.</p><p>You'll also need:&nbsp;</p><p>M1.6x8mm bolts and nuts&nbsp;</p><p><i>or &nbsp;</i>M1.6x6mm bolts and no nuts, should be fine without nuts, depending on the tolerances.&nbsp;</p><p>Maybe some glue for the center cap or if the centers are multi-piece</p><p>Highly recommend tools for putting them together: <a href="https://www.printables.com/de/model/16557-t-handle/comments">T handle by Kezat</a> + <a href="https://www.printables.com/de/model/298973-3mm-6-point-socket-14-drive-for-m16-nuts">3mm Socket by me</a></p><p>&nbsp;</p><p>I'll do more designs soon, and I'm open for wheel suggestions.</p>