Mini X Quadcopter

thingiverse

Update: I finally got around to updating this on thingiverse. I have made a bunch of changes but the main ones are: Redesigned the scad code for the body which makes it easier to make changes. Reinforced the arm holding brackets to prevent them from breaking. Removed the antennas. Thread the antenna wires through the holes in the top of the body instead. Added arms that have a 15 degree angle to move the motors out of the camera picture while flying FPV Added holes for screwing the naze32 onto the frame instead of using double sided sticky foam Various other changes A RC quadcopter frame designed for 2300kv motors and the naze32 flight controller. Perfect for line of sight flying in the back yard. Or FPV if you strap the camera on along with the battery. Works even better if you use the angled arms that I have added. I designed the frame to make it easy to replace arms if you break them. Simply unscrew four screws, take out the old arm and slide the new one in. A build log can be found here http://imgur.com/a/DRlkk and the openSCAD code for the models can be found on github https://github.com/TheZoq2/Mini-X-Quad Edit: Wow, 100 downloads less than two weeks, thanks for the downloads. If you build one of your own, I would love to see it! Instructions The design is very simple. Print 4 arms, one top body and one bottom body. If you want to, you can also print some landing gears and an antenna for the reciever. Attach the motors and ESCs to the arms. Use sticky foam tape to attach the flight controller and receiver to the body. Plug everything in and configure your flight controller Slide the arms into the slots on the bottom part of the body. Put the top on and use four m4 screws to fasten the body. Use a velcro strap to keep the battery in place on top of the quad Fly!