Miniature Paint Brush Stand / Organization Tray

thingiverse

This is a stand/organizer for miniature paint brushes (or any small paint brushes). The 3 trays in the front can be used for anything, my intention is to use the 2 smaller ones for water for cleaning brushes after painting, and the larger one for a dry sponge or paper towels for dry brushing, but they could be used for anything. I have read various reports of prints not being water tight. I used just a 2 layer wall thickness and the trays appeared to hold water just fine. I primed and painted them though just to try and make sure and seal small cracks were water might leak. The paint also acted as an adhesive to hold the 4 pieces together better. If it hadn't my intention was to use a hot glue gun and glue everything together. Permanently fixing the pieces together isn't required, it just makes the top more stable as there is a slight amount of slop with the risers and the slots they go into. If it isn't obvious, print the below quantities 1 Base 1 Top 2 Risers Print Settings Printer: Customer (3UP) Rafts: No Supports: No Resolution: 0.2mm Infill: 15%