Miniatures Case, Large 490% faster print, less filament

thingiverse

This version prints in 5 hours instead of over 1 day--see Print Settings! It also uses less than half of the plastic. Find out what else is available and how we can help each other make things at [zahyest.com](https://zahyest.com). ## Differences in Poikilos remix (compared to "Miniatures Case - Large" by thecardbazaar - 490% faster print (using the settings below), and less filament - Walls are .8mm. - The bottom is .64mm (A .32mm "1-layer bottom" version is also included). - The words are removed. - A lid is included (with optional 5mm spacer to allow for tall 40mm minis (without spacers, max is 35mm). The top of the lid (the first layer since the lid prints upside-down) has 1 layer (at .32mm high), so edit it or decrease the layer height to avoid holes if your first layer usually has holes that are unacceptable. - Using the settings below, the print time is 1h36m (40g = 13.11m = $1.45 @ $27.15/750g such as FormFutura HDglass). - or for the "CornerSpacers" version doesn't have dividers: 1h16m (32g = 10.35m = $1.14 at the HDglass rate above). - If you have minis with high weapons that go horizontally past the base's radius, you may want to use this version because the dividers may hit the weapons and damage the minis when closing the box. - The "35mmTall" version without spacers prints slightly faster. ## License - [Creative Commons Attribution 4.0 International](https://creativecommons.org/licenses/by/4.0/) (CC BY 4.0) - by thecardbazaar and Poikilos - based on [Miniatures Case - Large](https://www.thingiverse.com/thing:3522073) by [thecardbazaar](https://www.thingiverse.com/thecardbazaar) March 27, 2019