Miraculous Ladybug Ice Yoyo
thingiverse
This is the yo-yo design from the season 2 episode Frozer. Instead of the center spot and the 4 spots around, this yo-yo has 6 hexagon spots in a circular shape and one hexagon spot in the center. I have chosen some tolerances, so mounting the parts should not be too difficult. Note, that the spots and the axis must be glued to stay in place. The axis needs a strong glue ! The prototypes have been printed with 0.15 mm layer and 30% infill but the axis was printed with 100% infill. I also generated a ring shape so the thread does not cut into the finger. Printing this part is not mandatory. yoyo_base_body.stl - print twice yoyo_center_spot.stl - print twice yoyo_finger_ring.stl - print if needed yoyo_noncenter_spots.stl - print twice yoyo_axis.stl - print once
With this file you will be able to print Miraculous Ladybug Ice Yoyo with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Miraculous Ladybug Ice Yoyo .