MK10 bed sensor adaptor Wanhao D9
thingiverse
Adaptor for using the larger M-18 inductive sensors (8mm sensing distance on steel) in place of the M-12 (4mm sensing distance). This allows the stock 2.2mm borosilicate glass that comes with the Wanhao D9 to be placed directly on the aluminum bed and actually be recognized by the sensor! I tried this setup with a slightly thicker piece of glass (about 3.5mm), IT WILL NOT REGISTER. Must be used with 2.5 or less, but luckily a perfectly cut and sized piece is standard with the D9 after you strip all the other layers off. If you're ordering a new sensor, It is a PNP NO 6-36vdc 8mm sensing distance, 18mm body diameter. They are about $8. You will need an M8x1.25 button head screw or similar, 10-15mm long is fine
With this file you will be able to print MK10 bed sensor adaptor Wanhao D9 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on MK10 bed sensor adaptor Wanhao D9.