MOD-L 4in EVO 1

cults3d

I made small modifications to the top and bottom plate and made some beefier 4in arms. -Top plate mod: clearance for battery leads and holes for toilet tank battery strap. -Bottom plate mod: hole made for a zip tie to support the vtx antenna. -Arms: specified 4mm thick carbon and arms have been thickened horizontally by 1.5mm as well. Im also playing around with printed parts to use on this frame. Since all my cameras are 14x14 I made some mounts for the front standoffs. I also made a center arm lock piece to provide more support to the arms. The idea there is that this piece could be printed in either tpu or petg in varying infill percentages for different levels of stiffness. Im currently getting the frame carbon cut so these are to be considered as experimental files. Once confirmed, cut, built, and flown I will adjust files if there are any modifications made. The way I am going to build this quad can be previewed here: https://rotorbuilds.com/build/21520 Ultimately I want to run this quad with a lofat stripped hero 6 gopro and a 4s 650-850mah battery.