Model Rocket (A-C Motor)
thingiverse
This is a model rocket designed after Estes model rocket, Wizard. It can take rocket motors type A-D. I am currently printing it. You need a straw that will fit on launch pad rod, rubber band, strip of bright fabric for streamer, tape, 3d printed parts, glue, rocket motors, and a launchpad. Use 40% infill on the cone and use 100 percent infill on the rest. You want rafts & supports on the cone and body. It does not mater if you have it on the fins. The assembly goes as follows: Step 1: Glue on the fins Step 2: Cut a rubber band in half and tie it to the nosecone Step 3: Glue the rubber band inside the body Step 4: Make a streamer and tape it to the middle of the rubber band. Step 5: Roll up the streamer and put it in the body. Put the nosecone on Step 6: Glue straw onto body so the bottom of the straw is 2 in up. Step 7: Launch!!! Note: I have made a better sized rocket body. If you have printed it before 5/18/22 then you will need to reprint it. (Sorry!)
With this file you will be able to print Model Rocket (A-C Motor) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Model Rocket (A-C Motor).