Modern Vespa Key Holder

prusaprinters

<p>After a few days of testing, I removed the "work in progress" flag and updated the files to the final version.<br/> <em>Some improvements:</em></p> <ul> <li>two key version (ignition and top case) thinned by 5mm</li> <li>added a hooking point for accessories, such as carabiners or lanyards</li> <li><p>aesthetic improvements, as a profile that most evokes the Vespa style and the stylized reproduction of the Vespa GTS Super vent grid<br/> ##### Printing tips</p> <p>Print preferably with flexible filament such as ninjaflex or any other TPU/TPE. Better results you can have with zcory Rubber HS filament.<br/> If you use a stiff filament, most likely you will need to heat the self-locking M4 nut to insert it into its housing..</p> <p>To complete the double keys holder and the master key holder, you need an M4x25 allen bolt with a M4 self locking nut.<br/> The Single hey holder needs an M4x20 allen bolt with a M4 self locking nut.</p> </li> </ul> <h3>Print instructions</h3><p><strong>Printer Brand:</strong> Zortrax</p> <p><strong>Printer:</strong> Zortrax M200</p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.15mm</p> <p><strong>Infill:</strong> 30% honeycomb</p> <p><strong>Notes:</strong></p> <p>Use only flexible filament.<br/> Put some supports only under the hooking point.</p>