Modified parts for OpenScan - 3D Scanner v2

thingiverse

ROTARY ARM: I sometimes prefer to print single objects instead of pairs. This avoids stringing between the objects and also allows to print smaller/shorter jobs if I don't want to keep the printer busy too long or if there is only a small amount of filament left on the spool. I also found that the widest of the three slots is only 10mm while the counterpart that should fit in is 11mm. So I'm also providing a second version of the arm with that dimension changed to 11mm. Printed this part in PLA with 1.6mm wall thickess and 20% infill. MOTOR MOUNT: The motor mount for the turntable motor does not fit my stepper motor as the mounting holes are slightly on a different position. So I'm providing my modified version with the mounting holes at a pitch of 31mm. Also I changed the slots for the parts that attach to the motor mount the way they have a more loose fit. I printed this part in PLA with 1.2mm wall thickess and 20% infill. Also used standard supports that came off quite well.