Modular Cable Chain Redux

thingiverse

I couldn't find a cable chain that fit my needs among many available options. That's why I designed this variation that allows for approximately 170 degrees of free movement. Along with this movement, you can insert wires after the chain has been assembled. There are three STL files in the download: * Cable Chain Link Branded: This version allows for full 170-degree movement. * Cable Chain Link_Restricted Movement: This limits flex to only one direction. * Body Plug: Used to slide into the bottom of links, locking in wires. * X_Motor Mount Cable_Bracket: Connects chain to X motor mount. The printer's choice determines which version of the chain to use. Details: Each link extends the length of the chain by 28mm (2.8cm or 1.10236 inches). Inner clearance is 14.5mm wide and 11mm tall. Assembly: Once links are printed, they will snap into each other by hand. It's a snug fit to get them together but should move freely once popped into place. Future Development: I am currently working on brackets for mounting to the X-axis carriage and motor mount for the A8. EDIT 03/03/2017 A bracket has been uploaded for connecting to the X-Motor Mount on the A8. I am still in the process of printing and testing this bracket, which means changes may be made to it. If you're willing or wanting to print this bracket and report back with any issues, I would greatly appreciate it. EDIT 03/04/2017 The X-Motor Mount Bracket has been changed again to allow for easier printing and a different sizing. An image has also been added to demonstrate the suggested printing orientation. Print Settings: Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 30% Notes: The individual links can be printed without support, but the X-Motor Bracket will require supports to print.