Modular Naked Hero 8 Rig

thingiverse

This is a full modular setup of case for Naked GoPro 8 and mounts for: Lumenier QAV-CINE Freybott Edition front and rear BangGod front and Shendrones Geyser front Plus I'm including mount-less versions of the mounts so you can adapt to your quad. The Naked case is adapted from the BetaFPV case and has room for a Matek BEC if you like. also, I modded the front so that the lens doesn't stick out past the front of the print as it does with their stock design, so your ND filter doesn't rub on the lens. Also made a lip where you should be able to stick one of those small ND filters. This probably won't hold well enough to use alone... it's designed to be used in conjunction with the larger TBS-style filter in the THICK rig only. (see below) These mounts hold Camera Butter ND filters ND Filters for Naked: https://camerabutter.com/products/nd-filter-for-de-cased-or-naked-gopro?ref=a1kqagsm4v5c TBS style ND Filters: https://camerabutter.com/products/black-diamond-universal-nd-filter-tbs-jello-guard?ref=a1kqagsm4v5c The best way to print the naked front and rear cases is face down, with the insides facing up... regular supports. Getting the insides and screw holes clean is the most important part. The THICK case has tons of extra protection for your naked 8, including an ND slot for the super tough TBS style ND Filters from CameraButter: https://camerabutter.com/products/black-diamond-universal-nd-filter-tbs-jello-guard?ref=a1kqagsm4v5c PLUS there's room underneath for a light stick-on ND https://camerabutter.com/products/gopro-hero-8-nd-filter?ref=a1kqagsm4v5c This is so that if you really hit the ground hard and smash the outer ND (it happens) you don't end up scratching your raw GoPro lens because there's a 2nd layer of glass in there before the main lens. UPDATE 01-29-21: New file "Geyser Rear Micro Mount 8.stl" for rear mount of small Naked 8 mount on Geyser UPDATE 02-26-21: New file "BangGod Rear Naked Heavy Case 8.4" & "banggod rear naked mount 8.3" rear naked 8 heavy case and mount for BangGod reverse cam... includes immortal T mount. Based on my initial use out in the real world, this design needs to be strengthened at the bottom... it separates easily if you land while moving forward... also, the case needs grooves snipped out on the one side otherwise your prop will hit it. I have got it working, but you do have to lean it all the way down and snip a little groove out just to be sure you have room for that prop. Check out my website at http://furiouspugs.com/ Subscribe to my YouTube channel at https://www.youtube.com/channel/UCnsGcwDe2qBgbvLqBFe1sOQ