Modular Rode USB-Mini Desktop Stand

prusaprinters

<p>If you want to raise the mic closer to your mouth, but you do not have a stander, you can do it with this simple design.<br/> There are 50mm and 100mm sections that you can screw together.</p> <p>The thread (ANSI 5/8-27 UNS modelled in Fusion 360) fits well with the mic, but between the printed parts fairly tight, so I used first the adapter screw which comes with the mic to clean up the bottom thread of the extenders and a little grease (the one that you got with your printer works well) to be able to screw them together more easier. After you screwed them together a few times it goes easier.</p> <p>I am using 4X100mm adapters and I find it still stable enough.</p> <p>The design is hollow to spare material and printtime, but still rigid.</p> <h3>Print instructions</h3><p>I have enclosed the 3mf files where you can see that I used variable layer heights.<br/> 0.3mm for the main body and 0.15mm for the threads.<br/> Infill is 100%, no support needed.</p>