Monitor Riser Legs

prusaprinters

<p>Since we have been on lock-down due to COVID-19 my wife has been using her laptop and a second monitor (for work). Unfortunately, the only way to level the screens up has been to balance the laptop on things.</p> <p>I designed and printed some sturdy legs to use with an old kitchen cupboard shelf I had in the shed. The slot for the wood is a little wide, but works fine because the wood is fixed with wood screws.</p> <p>The timber I've used is 18mm thick.</p> <p>I've also added some positive messages to the prints to keep spirits up during this difficult time.</p> <p>Hope this helps.</p> <h3>Print instructions</h3><p>I laid the models flat on the print bed<br/> Used the standard PrusaSlicer speed setting (0.2mm)<br/> I printed in PETG, but this model is so chunky any material will likely do.<br/> I never used a brim, but would probably have needed one for ABS<br/> No supports<br/> I used a 20% infill, but this is probably overkill. Could be significantly less and retain rigidity.</p>