Monoprice Maker Select (Wanhao Duplicator i3) Meanwell NES-350 Power Supply (PSU) Cover and Mount
prusaprinters
<p>This is a remix of <a href="https://www.thingiverse.com/thing:2750908">https://www.thingiverse.com/thing:2750908</a> originally made by <a href="/parhamdb">parhamdb</a>. It also uses the mounting tabs from <a href="https://www.thingiverse.com/thing:1686028">https://www.thingiverse.com/thing:1686028</a> by <a href="/mmoore0">mmoore0</a>.</p><p>Before I got a Prusa printer, I had a Monoprice Maker Select V2 (RAMPS). I really liked parhamdb's original mPSU mounting model because it offered direct chassis mounting, rear plug mount, plenty of space for wiring, and was also nice to look at. Unfortunately, my Sompom (stock) power supply died, so I replaced it with a Meanwell NES-350-12. This new PSU didn't fit in the original model since the model was designed for use with the MMSV2 stock supply. I liked the fit of mmoore0's Meanwell Power Supply Cover, so I combined the two! </p><h3>How I Designed This</h3><p>I used slic3r PE to chop the models at specific heights, then used MeshMixer to stitch them together. I had to expand the X a bit on the base so that the Meanwell tabs would fit on top of it.</p><p>Category: 3D Printer Parts</p>
With this file you will be able to print Monoprice Maker Select (Wanhao Duplicator i3) Meanwell NES-350 Power Supply (PSU) Cover and Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Monoprice Maker Select (Wanhao Duplicator i3) Meanwell NES-350 Power Supply (PSU) Cover and Mount.