Voron Afterburner The Warbird v2

thingiverse

This is my fan mod for Voron 2.4 I've been looking for a fan mod for a long time, with which I can also reliably print PLA, there are one or the other mod, but nothing was satisfactory. Anyone who has dealt with the original fan knows that not much arrives below and the distribution of the air flow is not even. Then I came across The Warbird and the first approach was already promising, but this one still works with the original fan, there is also the mod where the 4020 is swapped for a 5015, but it has the same problem as the 4020, the splitting of the airflow. https://github.com/Greg191134/Voron/tree/master/Afterburner%20Optimisation/The%20Warbird So I thought about it and combined The Warbird with the Voron 0.1 design, i.e. with two 4010 Turbo fans, but not just any fans, the Gdstime Dual Ball 24 Volt 3.3 Air Flow, those were the only fans that also have power, the others 4010 fans that I ordered were no good or no performance. In any case, I am satisfied with my mod and simply print PLA with 70% fan setting on my Voron 2.4, with overhangs of course with 100% One more note, I originally used this design with the original top fan, so 3 fans, but again the airflow was inconveniently changed to the center of the nozzle and the top fan wasn't really necessary. What you need: 2x Gdstime Dual Ball 24 volt 3.3 Airflow Turbo Fan https://de.aliexpress.com/item/32799376487.html?spm=a2g0o.cart.0.0.62f93c00oADZjC&mp=1 2x M2.5x8mm or 10mm screws 6x M3 thread inserts (2x to screw a hotend fan directly to The Warbird FRONT) 2x M3x12mm cheese head screw for hotend fans 2x M3x14mm cheese head screw for fan cover And the other screws that are already installed anyway.