Mordor V-roller Carriage

grabcad

V-roller carriage plate to mount on to 20x20 extrusion.Integrates a direct drive extruder, BL touch, 30mm radiator fan and dual 5015 blowers.Can also be used in Bowden setup as well.Material I use was CF-PC :https://filaments.ca/collections/all/products/carbon-fiber-pc-cpe-1-75mm?variant=32933355814997Direct Drive extruder:Sherpa mini from aliexpress SLS nylon printed.https://github.com/Annex-Engineering/Sherpa_Mini-ExtruderDual 5015 blower ducts:I used the ducts from a voron tool head called Mantis, made by Long.https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015Hardware:x15 of 3mm heat set inserts.https://www.amazon.com/gp/product/B08BJD3W4X/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1Various lengths of 3mm cap screws ( i will update specific lengths later)https://www.amazon.ca/gp/product/B07CBZRXQ8/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1Used the same v-roller screws and nuts that came stock with the printer.Zip-tiesBL touchPrinting:0.6mm hardened nozzle at 0.3mm layer height and 0.6mm width.3 perimeters60% infill. Cubic patternsupports only needed for the 30mm fan duct.