More angle steering in Turbo Racing C70 (MINI)

cults3d

I recommend buy additional "left/right steering assembly holding wheels" or use unused aditional parts of C70 (mini) for this mod. I filled black chassis like on on picture by mini metal file in local shop. I drilled (small drill for hand drill 0.8 mm, diameter of paperclip wire) small hole in half the length of this white thing holding wheel and put (and glue) small cutted "wire" from paperclip. Printed cintre2_wiesak2 in 0.08mm height layer and with XY compensation 0.05 (XY compensation is need if on program slicer (Cura/Prusa Slicer) not showing good print with good borders, holes, etc.). After print drill with mini hand hand drill holes in it with of diameter of paperclip wire you use cutted for steering assembly (mine was 0.8 mm and I used 0.8mm drill). If steering is hard or wheel not back smoothly try lose screw on top chassis or file on sandpaper cintre2_wiesak2 (green thing on pictures) to make it thinner.