Motor Cable Cover for 220mm/5" Freestyle FPV Drone

thingiverse

These are cable hides for the motor wires on 220mm/5" Freestyle FPV drone builds. Specifically, these are intended for drone arms that are about 5mm thick and 10mm wide. The covers are 42mm long and should sit about center in the arms. No adhesive or tape necessary - these simply clip in place. If your drone arms are the dimensions described above, it should be a fairly snug fit, so they shouldn't introduce additional resonances into the frame. There is a 1.5mm tall, 8mm wide channel at the top of the cover to allow the motor wires to go through unobstructed. I recommend printing just one to start with to ensure it fits properly on your drone arms. If it does, print 3 more and enjoy a slightly cleaner-looking cable management system for your drone arms! If not, these aren't the covers for you. All together, 4 cable covers should weigh about 5.9g if printed out of ABS or PLA (I recommend ABS for outdoor exposure and shock resistance, or even TPU with a high shore hardness if you're able to print that).